The Bathroom Ceiling Heater is very essential during the winter season. They provide warm air and you can easily bath and wash your clothes with comfort.
They also keep away the pollutant of the air and humidity. It is safe to use bathroom heaters and they are very easy to use.
You just need to switch on the button. Some heaters also have bulbs in them, and they look like a decoration piece.
Best Bathroom Ceiling Heater list ( Fan, Light, Heater, Combo)
- Bathroom Heater Fan Combo – Broan-Nutone QTX110HL
- Bathroom Ceiling Heater Fan – Panasonic FV-11VH2
- Bathroom Ceiling Heater Fan Light – Broan-NuTone 655
- Bathroom Ceiling Mount Heater – Broan-NuTone 157
- Infrared Bathroom Ceiling Heater – Broan-Nutone 163
- Bathroom Exhaust Fan with Light and Heater – Delta Electronics RAD80L
- Best Bathroom Exhaust Fan with Heater– Broan-Nutone 9093WH
There are many other features and we will discuss everything about the, best bathroom heater. for your guidance.
These heaters are available in many styles and models. You will confuse to decide which heater you want. But we are here to eliminate these confusions.
In this article, we will tell you about the top 10 bathroom ceiling heater reviews with their features, pros, and cons
How To Pick The Right Size Bathroom Ceiling Heater?
Bathroom Heater Installation
Why these features are there? How can you select the best bathroom heater? This buyer’s guide will put light on all the features. This will help you to decide which heater is suitable for your needs.
We will enlist all the features, but not all heaters have these features. There can be an exception, but you can also compromise on some features which are not much worthy for you. Let’s start the discussion.
At last, you will have to pay for the electricity cost that you have used. So, it is better to select the heater by seeing its power consumption. Usually, bathroom heaters are available from 1200-1700 watts. The wattage increases due to the increase in the heating area.
If your heater has a light, then it will also consume energy. So, make sure to select the right wattage. A low wattage heater will not be able to heat a large area. We can also calculate the energy cost and it is very simple.
You just need to multiply the wattage of the heater with the hours of use. Then divide the answer with 1000 and multiply it with the energy cost per unit.
For example, I have a heater rated 1,500 watts and I use it four hours a day. The cost per unit is 20 cents.
- Multiply 1,500 with 4 hours. You will get 6,000
- Divide it by 1000. The answer is 6.
- Now multiply with 20 cents. 120 cents or $1.2
It means I will have to pay $1.2 for every four-hour use. You can also calculate the energy cost in the same way to get the idea. If there is a lamp, then you can include its wattage as well. The Right bathroom heater will save you the energy cost while providing you with excellent comfort.
Safety Guidelines For Using Bathroom Heater
To ensure safety there are some safety features in the heater. You can also check the certification of the heater which will ensure its safe usage. Safety features will help to save your life and the unit as well.
The automatic thermostat in the heater has the capability to maintain the temperature in the area. It shuts off the heater when the temperature is reached to the maximum limit. This allows the heater to prevent overheating.
Further, there is usually an automatic shut off feature, which shuts off the heater in abnormal conditions.
It is better to have a dedicated circuit with a circuit breaker for a bathroom heater. The wiring should be according to the amount of current that the heater can draw. You need the wattage of a heater including the wattage of fan and lights.
Then divide the power in watts with the voltage at your home. You will get the current drawn by the heater. The wiring should be greater than the current drawn by the heater. Use the recommended wiring and circuit breaker.
The heating element and the fan of the heater produce noise. This noise has a level which interprets its amount. The noise level of the heater should be below 4.0 sones.
The lesser the noise level is the more it is bearable. The sound level of some heater is irritating. You should check the noise level of the heater before buying it.
The airflow of the heater is given in CFM which stands for cubic feet per minute. It tells the volume that the heater can cover in a minute. You can get an idea that how much time the heater will take to heat the whole area. The increase in the CFM rating will increase the wattage of the heater.
The heater will require an area in the wall or ceiling. Make sure you have that suitable area to fit the heater. If you have a small space, then pick the heater size accordingly.
Material of Body
The material of the outer body should be made of metal such as steel to avoid rusting. Sometimes the body is also painted to avoid corrosion by air. The outer grill should be made of polymer plastic. It suits well with the decoration and ensures corrosion-free service.
The heater or ventilator should be capable of removing the humidity from the bathroom. Some heater removes the air contaminants and odor from the area to give you a fresh breath.
Modern DC motors are used in bathroom heaters which are permanently lubricated. You do not need to lubricate it manually. Before buying a heater ensure that it has a maintenance-free motor.
Some heaters have lights and fans in them. So, they should be controlled separately. It means they should allow you to run anyone or all at a time. The fan spreads the heat in the whole area and the bulbs provide you light.
Most of the heater comes with a 1-year warranty, but some have a 3-year warranty as well. Make sure to read the warranty terms and conditions carefully.
Bathroom Ceiling Heater REVIEW
1. Bathroom Heater Fan Combo – Broan-Nutone QTX110HL
This is a powerful 1500 watt heater which will provide heat at 110 CFM. You will require a 20A circuit to use it.
It is very quiet while operating, its noise level is only 0.9 sones. It can provide enough heat to warm a bathroom of 100 sq. Ft. It is very easy to install and comes with anti-vibration mounting brackets.
The permanently lubricated motor requires no maintenance. Its high power blower fan will spread warm air all around. The outer surface is made of polymer plastic due to which it is safe from corrosion.
You can install a 60watt and 7-watt night bulb in it, but they are sold separately. It is certified by HVI and Energy Star; hence, it is safe to use. It keeps away the allergens and particles from the area.
- Very quiet operation
- Blower fan
- 1-year warranty
- Safe to use
- Appealing design
- Heating element is not durable
- Energy consumption
2. Bathroom Ceiling Heater Fan – Panasonic FV-11VH2
This bathroom ceiling heater fan is lightweight and easy to install. It has a fan to blow the hot air in the bathroom. It will remove the moisture and it also prevents the air pollutants in your bathroom.
The fan motor is permanently lubricated; therefore, you do not need to lubricate it manually. It has 110 CFM power ratings which can blow the hot air in your bathroom quickly.
This product is designed by considering the safety measures and it is also certified by UL. The noise level of the fan is nearly 0.7 sones which will not irritate you.
The vent cover is made of white plastic; therefore, it will never undergo corrosion. The manufacturer offers a 3-years warranty of all parts and a 6-year warranty for DC motor.
It is durable and can work for years. It is a 1430 watt bathroom heater which consumes a lot of electricity.
- Permanently lubricated parts
- Powerful blower motor
- Very quiet
- Can warm large bathrooms
- No light
- Electricity consumption
3. Bathroom Ceiling Heater Fan Light – Broan-NuTone 655
This stylish ceiling heater fan is quite appealing in its design. The wattage rating of the heater is 1300 watts which will draw nearly 12A current; hence 20A wiring is recommended for it.
The housing is made of steel and painted, so it will not rust. The fan has two blowers and a fan vent, you can use these three functions together or separately.
It also has a spot to install the light, but unfortunately, you will have to buy it separately. It is a 70 CFM heater and it will warm your bathroom in a few minutes with two blowers.
You can use it for a 65 sq. Ft bathroom area. You can use the fan, light or heater together or separately using a separate switch. The seller offers a one-year limited warranty.
- Fan and Light
- Stainless steel motor housing
- Looks like décor
- Light can work independently
- Little noisy
- Not for large bathrooms
4. Bathroom Ceiling Mount Heater – Broan-NuTone 157
This is a very compact and efficient ceiling heater fan and it weighs only 1 lb. This can provide radiant heating within seconds.
It consumes 1250 watts and delivers you instant heat with the fan. You need at least a 15A circuit to run it safely. The outer part is made of finished aluminum; therefore, it is free from rusting.
It is inexpensive and very easy to install. It is an excellent heater to heat a small indoor area only, it will not work in big bathrooms.
Its overheat protection ensures safe operation and it is also listed in UL. You can also purchase a separate thermostat control to fit with this heater.
The motor is permanently lubricated; hence it requires no maintenance. This heater is energy efficient which will save your electricity cost. The seller also offers a 1-year limited warranty.
- Overheating safety
- Fan-forced heating
- Requires no maintenance
- Easy to install
- Very lightweight
- Doesn’t fit with décor
5. Bathroom Exhaust Fan with Light and Heater – Delta Electronics RAD80L
RAD80L BreezRadiance heater has a built-in thermostat to control the temperature. In case of overheating the heater shuts off automatically.
It is also certified by HVI; hence, it is very safe to use in your bathrooms. This is very efficient and provides 7.6 CFM per watt. The heating element is rated 1300W which gives 80 CFM to heat your small bathroom.
It has a CFL to provide energy-efficient light and a fan to spread the warm air. It operates quietly with a noise level of 1.5 sones only. Further, it looks fancy and suits with the decoration.
The inner body is made of galvanized steel which is not prone to corrosion. Its efficient DC motor and CFL can save you energy. The manufacturer also offers a 3-year limited warranty, which ensures its durability.
- Energy efficient
- Automatic thermostat
- Light and fan combo
- Safe to use
Light is not much bright
6. Best Bathroom Exhaust Fan with Heater – Broan-Nutone 9093WH
This small round Bathroom exhaust fan with heater has a light. It has a 70 CFM rating which can provide heat to 65 sq. Ft bathroom.
The fan is quiet, and it distributes the warm air in the whole area. The power rating of the heating element is 1500 watts which will provide enough heat.
It has a night bulb and bright 100 watts incandescent lamp space and they are sold separately. It is very easy to install, even you can install yourself.
The manufacturer offers a 1-year limited warranty with terms and conditions. The round shape looks like a decorative piece with a light in the middle.
The noise level of the heating element and fan is 3.5 sones which is not very much. It has automatic thermal protection to control the temperature. It is safe to use in bathrooms and certified by UL.
- Two light brightness
- UL certified
- Automatic thermal protection
- Matches with decoration
- High electricity consumption
- Difficult to replace the bulbs
8. Infrared Bathroom Ceiling Heater – Broan-Nutone 163
This Infrared bathroom ceiling heater works on two infrared bulbs, which provide radiant heat in your bathroom. It gives instant heating within a few minutes.
One bulb is rated 250 watts and two bulbs can be installed in it. You need to purchase these bulbs separately, they are not included in the package. It is very easy to install and replace the bulb in the future.
It is very energy efficient and has only two bulbs which save your energy cost. There is no fan in the unit, therefore it is super quiet. It provides infrared radiations; therefore, it is good for spot heating.
It is very safe to use and listed in UL. The housing is made of steel; hence, there is no risk of corrosion. Its appearance is appealing and looks like a simple bulb holder.
- 1-year limited warranty
- Very quiet
- Easy installation
- Infrared radiations
- No fan
- Not for large areas
8. Broan-Nutone QT9093WH Heater
It is a multi-function heater with fan, light, heater, and nightlight. It is 110 CFM heater which is enough for a 105 sq. Ft bathroom.
It operates quietly and has a noise level of 3.0 sones. The product is well furnished and decorative. You will have to buy 100-watt and 7-watt bulbs separately to place in it.
It removes air contaminants to provide you fresh air. The HVI certification ensures its safe use. It has a 1-year warranty from the manufacturer.
The motor is permanently lubricated and needs no manual lubrication. It has 1717 watts rating including bulb wattage, but it is very efficient due to minimum loss.
You can also place an optional thermostat control to control the wattage and temperature, but it should be purchased separately.
- Enough for large bathrooms
- Contaminant free air
- Energy efficient
- No motor maintenance
- Requires a lot of electricity
9. High-Quality Bathroom Wall Heater
This is a stylish wall mounted heater that will provide you soothing heat in seconds at 75 CFM.
It has a built-in thermostat to provide heating form 45˚F-75˚F. It has a 1500 watt power rating which is enough for 150 sq. Ft bathroom.
You can select 1500 or 750 wattage settings at the time of installation. The heating element is 100% energy efficient which will save your energy.
It comes with a portable temperature and humidity measurement device that will tell you the temperature and humidity of the area.
It is safe to touch, and it will not harm your pets. The automatic overheating protection shuts off the heater automatically.
It is certified by CSA and has a 1-year limited warranty. You need a dedicated wire and circuit breaker for perfect operation.
- Two wattage settings
- Automatic thermostat
- Automatic overheating safety
- Safe to touch and quiet
- Energy efficient
Parts are not available in the market
10. Broan-Nutone 605RP Exhaust Fan and Heater
Nutone 605Rp is a 1300 watt heater which is suitable to heat a 65 sq. Ft bathroom area. The outlet is made of a polymer which suits the decoration and does not undergo corrosion.
It has a fan and a heater, and both can be run together or separately. The compact design takes very little space.
It will provide you with air by eliminating the contaminants and odor in the area. The 70 CFM airflow will ensure the hot air in the room within a few minutes.
It is very easy to install and maintain. The nickel-chrome heating element will work efficiently and save electricity costs.
It has a 4 inches round duct opening for excellent ventilation. There is a 1-year limited warranty to ensure the product is free from defects. It has a noise level of 4.0 sones which may disturb you.
- Polymer grill
- Cleans air
- Saves energy
- No light
Bathroom Ceiling Heater and Its Types
The bathroom heater provides a comfortable bathing and washing atmosphere in the bathroom. It eliminates the freezing air and water droplets from the area. Moreover, it takes out the odor and infectious contaminants of air. It provides a relaxing and soothing environment in chill winters. The bathroom heaters can be classified into the following basis.
- Heating method
- 1) Heating Methods
There are two common heating methods available in the bathroom heaters. Both of them have different benefits and properties. The methods are given below.
Infrared Bulb Heating
These types of heaters have infrared bulbs installed in them. They use bulbs to provide infrared heating radiations. These bulbs are energy efficient.
Normally the wattage of these heaters is about 500-800 watts. The wattage depends on the number and size of the bulbs used. These heaters do not have fans in them.
The infrared radiation spreads in the room on its own. They are very easy to use and install. The infrared lamps are easily available in the market, and you can replace them like an ordinary bulb.
These lamps are good for a smaller area and they provide heating within a few minutes. They are excellent for spot heating and not good for a bigger area.
These heaters only provide heat and they are not for ventilation. They are very quiet because there is no fan. You can use them safely in your bathroom with a very low risk of fires and abnormalities.
As the name suggests these heaters have fans in them. There is a heating element in them which provides heat and the fan blower spreads that heat in the whole area.
The airflow depends on the CFM of the heater. The more the CFM, the larger area will be covered. These heaters can spread the air in the area very quickly.
They provide heating and ventilation as well. They remove the air contaminants and humidity for the bathroom. Many of the models of these heaters have bulbs or CFLs to provide light.
The fan and the heating element produce noise. The noise level of the heater is given in sones. There are different sone values for the fan and the heating element.
The sone value should be lower to provide a noise-free environment. These have safety features to shut off the heater on overheating. The design usually suits with the decoration.
Fan-forced + Bulb Heating
This is the combination of both. These heaters have a fan to blow the air and infrared bulbs for heating. There is no sperate heating element in them. All the properties are similar to bulb heaters, only the fan is included.
Bathroom heaters are usually placed on two places either on the ceiling or wall.
These heaters are installed on ceilings. They are away from the reach of any person. Further, they are also safe from water and obstacles.
These are easily installed on the walls. They do not have lights in them. They are reachable for maintenance purposes.
How to use it properly?
There might complain about the sound of the heater, tripping of circuit breaker and other problems. These problems might occur due to incorrect use of the heater. To use the bathroom heaters properly, you should follow these instructions.
- The bathroom heater requires electricity to run. There should be proper wiring size according to the wattage ratings of the heater. Otherwise, the wiring will get hot and rupture very early. It can even cause a short circuit. It is mandatory to check the amperage of the wire and circuit breaker.
- The circuit breaker should be rated more than the current rating of the heater, it will not trip in this case. It should not be very highly rated, use the recommended one; otherwise, it will not be able to protect your heater from faults.
- Use a separate switch or a three-way switch for multiple operations. The switches should be located on the wall. They should not be left hanging under the roof.
- The wiring of fan and light should be done separately if required.
- Clean the grills and the heater once or twice a year. The contaminants on the grill can produce odor; therefore, clean it accordingly.
- When replacing the light and heating element, make sure to read the wattage and their model number.
- The blower fan of the heater is very powerful. Therefore, the heater should be fixed tightly, to hold it on the place. It will not make any noise if it is fixed properly. Anti-vibrating brackets are the best to minimize noise.
- Never cover the duct or front cover of the heater with any material. It will absorb the moisture and pollutants of the bathroom.
- The motors used in the heater are usually maintenance-free motor. Never try to lubricate them to reduce the noise.
The above instruction will hopefully help you prevent common problems in your heater.
Benefits of Using electric ceiling heater for bathroom
To get a comfortable bath during cold winters you need a bathroom heater that will heat the air of the bathroom. The benefits of using a bathroom heater are,
The spot heating of the bathroom heater helps you to heat your bathroom only. You will not have to run your central heating and wait for minutes. It will start providing you with the heat within seconds. It will heat the whole air in the bathroom and to keep you warm and relaxed. You can save the energy cost of central heating.
Bathroom heaters are much safer to use as compared to other portable electric and gas heaters. These have a safety shut off switch and automatic overheating protection.
Fan and Light
Some heaters have fan and light features. The fan spreads the hot air in the room and takes out the humidity. The bulb provides you light in the bathroom.
Provide Fresh Air
The heater also cleans the air in the room. It takes out the contaminants and odor form your bathroom. It also reduces the humidity level and provides you with a fresh environment. Say goodbye to mildews as the heater will not let them grow.
You can operate the heater easily. Most of the heaters have automatic thermostats to adjust the temperature in the area. You can control the fan, light, and the heater and run as you want. You do not need to set anything it works on its own. Just press the switch and enjoy the warm air.
Most of the bathroom heaters have permanently lubricated motors that are free from maintenance.
The bathroom heaters are compact, and they can be fitted easily in a small space. The inner part goes into the ceiling and the outer part suits well with decoration.
Frequently Asked Questions
To wire a bathroom heater you should know the current it draws. To calculate the current, divide the wattage with the voltage of your house, the answer will be the current required by the heater. Always use the wire which can bear this current or more. Use a dedicated wire connection for the heater.
The bathroom heater has a heating element or bulb to produce heat energy from electricity. The fan in the heater spreads that heat in the bathroom. The bathroom heater also ventilates the area.
A bathroom ceiling heater is placed on the ceiling. They have a heating element and a fan in them. Some models have bulbs to light the area. They are far from the reach of pets and children.
Yes, bathroom heaters are safe. They have safety features in them to shut off the heater in abnormal conditions. They also clean the air in the bathroom and remove humidity.
Yes, you can use the fan, heater, and light of the bathroom heaters separately. There are separate switches for that, and you can turn on what you want. You don’t need to turn everything simultaneously.
Bathroom heaters are the need of everyone especially those who are living in cold areas. These heaters not only provide you heat, but they also provide fresh and contaminants free air. They take very little space and can be fitted on the wall or ceiling.
These have safety features in them, and they are also certified by authorities. We have enlisted the best bathroom ceiling heater in this article to save your time and money. The features, pros, and cons are all separately mentioned.
If you want to use your bathroom heater for years, then follow the proper usage guidance in this article. You should care about the wiring and the circuit breaker for the safe operation. You should clean your heater at least once a year to ensure good performance.
Bathroom heaters produce noise, but the lower noise level will not irritate you. These heaters can also serve as a light. The buyer’s guide in this article will help you to buy the best heater.
We recommend reading the warranty terms and conditions carefully. If you don’t know how to install the heater then call an electrician to do the job. We hope that this article will help you pick the best bathroom heater.